The R90HD is a high-class mini monitor. Unprecedented enclosure rigidity and leading edge drive unit technology in the shape of a 100mm (4”) MMP®II mid/bass driver and 25mm (1”) C-CAM® gold dome tweeter combine to produce clarity, dynamics and imaging abilities that are unparalleled in a speaker of this size. It can fill a room with high fidelity sound and yet visually melt into the background. The R90HD can be installed easily on ceiling or wall using the same high quality angled bracket supplied. Use the optional bespoke RadiusHD stand for floor positions.

• 4" MMP®II. The Metal Matrix Polymer drivers have been completely re-worked and re-modelled with the aid of new design and simulation tools to achieve higher sensitivity and increased magnetic linearity. The new shaped T-section pole and focussed magnetic gap produces better linearity and lower distortion, resulting in fast punchy bass. All drivers are dedicated and model specific, with each model in the Radius HD series being designed and voiced individually.
• 1" Gold C-CAM® tweeter providing extension to in excess of 35 KHz ensuring the wide frequency bandwidth of HD music and cinema formats can be replayed faithfully.
• Magnetically shielded drivers allow Radius HD to be safely used near sensitive microprocessor equipment or plasma/LCD displays.
• High quality crossover uses high-grade metalised Polypropylene capacitors for increased clarity. High-grade air core and laminated iron core inductors give lowest possible distortion and low insertion losses.
• Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet.
• Internal PTC auto-reset protection circuit to prevent over-driving.
• Specially developed high grade PCOFC internal cable is used throughout to ensure maximum signal transfer at all frequencies and low signal resistance.
• Flush fitting grille with rotate-able ‘m’ logo for positioning in Landscape or portrait orientation.
• A specially designed die-cast metal wall bracket is supplied, providing easy install and adjustment for wall positioning.

The R370HD active subwoofer provides a new dimension to a system’s sound. Its 255mm (10”) C-CAM® downward firing driver, powered by a potent 250W (RMS) Class D amplifier, will extend the reach of the RadiusHD satellites to add the deepest drama to movies and music.

The R370HD’s lowest frequencies are controlled so expertly that even subtle effects are better defined, enhancing the listening experience with bass you can feel as well as hear. The R370HD is equipped with a top-mounted control panel for easy access to volume and 2 EQ settings, 12V trigger input for power on/standby control from an AV amplifier, variable crossover control from 40Hz-120Hz, stereo, LFE RCA inputs and link outputs.

• Top mounted control panel - for easy access to volume and EQ settings.
• 18mm MDF cabinet construction with internal bracing
• 250W RMS Class D amplifier with switching power supply
• Downward firing 10” Ultra long throw, C-CAM bass driver.
• 12 Volt trigger input – For power on/ standby control from AV amplifier.
• Crossover/ frequency control. Variable from 40z-120Hz
• Low pass filter switch – for LFE or Stereo input selection
• 0-180 Phase switch
• Power switch with ON – Auto- Off/ trigger settings
• Stereo/ LFE RCA inputs
• Stereo/ LFE link outputs
• Silicone rubber anti-resonance feet
• 2 x Pre-set EQ settings – for Music or video programme optimisation.

Please note....stands are not included in package price.